본문




제품 정보
WD WD-500SN II
Special Feature
특장점① | * Selectable various functions |
---|---|
특장점② | * High-performance direc-current TIG arc welder |
특장점③ | * Built-in remote control function |
특장점④ | * Suitable to automatic line |
특장점⑤ | * Excellent performance for thin, medium, or thick plates |
특장점⑥ | * Possible single-phase or triple-phase input |
특장점⑦ | * 220V/380V/440V combined use |
규격 | 360 x 623 x 580 (360 x 693 x 615) |
기타 | ※ Product specification can be changed unexpectedly for product performance improvement. / ※ Remote control is separate way option. |
- 이전글WD-500SN 20.12.13
- 다음글WD-500PN II 20.12.13
제품설명
Specification | |||||||||||||||||||||||
MODE | WD - 500SN II | ||||||||||||||||||||||
Process | TIG | STICK | |||||||||||||||||||||
Output Current | A | 3 Phase - | |||||||||||||||||||||
1 Phase - | |||||||||||||||||||||||
Input Voltage | V | ||||||||||||||||||||||
Rated Frequency | Hz | ||||||||||||||||||||||
Rated Input | KVA | ||||||||||||||||||||||
Rated load Voltage | V | ||||||||||||||||||||||
No load Voltage | V | ||||||||||||||||||||||
Duty Cycle | % | ||||||||||||||||||||||
Output Current range | A | ||||||||||||||||||||||
Pulse Current range | A | - | |||||||||||||||||||||
Start Current range | A | ||||||||||||||||||||||
Crater Current range | A | ||||||||||||||||||||||
Gas Pre flow | sec | ||||||||||||||||||||||
Gas After flow | sec | ||||||||||||||||||||||
Up Slope | sec | ||||||||||||||||||||||
Down Slope | sec | ||||||||||||||||||||||
Arc Spot | sec | ||||||||||||||||||||||
Pluse Frequency | Hz | ||||||||||||||||||||||
Pluse Width | % | ||||||||||||||||||||||
Crater control |
| Off, On, Repeat | |||||||||||||||||||||
Dimension (WxDxH) | mm | 360 x 623 x 580(360 x 693 x 615) | |||||||||||||||||||||
Weight | kg |
※ Product specification can be changed unexpectedly for product performance improvement.
※ Remote control is separate way option.
댓글목록

xcvb님의 댓글
xcvb 작성일
xcvb님의 댓글
xcvb 작성일
cvbn님의 댓글
cvbn 작성일
fghj님의 댓글
fghj 작성일
sdfg님의 댓글
sdfg 작성일
sdfg님의 댓글
sdfg 작성일
fghj님의 댓글
fghj 작성일
dfgh님의 댓글
dfgh 작성일
fghj님의 댓글
fghj 작성일